Differences

This shows you the differences between two versions of the page.

--- manuals:zround:zround [2021/06/05 21:50] – [3. Race Settings] zround
+++ manuals:zround:zround [2022/09/18 15:13] (current) – [Info / About] zround
@@ Line 50: / Line 50: @@
 |{{:manuals:zround:2.21.status.png?100|}}|[[:LapCounters|lap counter]] state|
+==== 1.1 Application settings ====
+Visit [[zround:application settings]]
 ===== 2. Race info =====
 Race info panel shows information about the run
@@ Line 64: / Line 66: @@
 Take a look to [[manuals:keyconcepts|Key concepts]]
-For Best time qualifying there are additional options
-^Option^Description^
-|Laps|Number of best laps to compute the "best lap" time. For example, you can use the 2 best lap times to be considered in order to compute the best racer|
-|Consecutive|If laps is greather than 1, you can define if the n-best laps must be consecutives|
-|Algorithm|You can choose if you want compute sum or average in order to show the "best lap time"|
 ==== 3.1 Race mode ====
 ^Setting ^Function |
-|Qualifying|Qualify mode. \\ **Laps**: Max. number of laps. Tie break by less total time \\ **Best time**: Best lap time|
+|Qualifying|Qualify mode. \\ **Laps**: Max. number of laps. Tie break by less total time \\ **Best time**: Best lap time. See //Best lap Qualifying options//|
 |Start|Start mode: \\ **Staggered**: racers have their own clock. It starts on the first detection \\ **Le Mans**: All racers have the same clock. Extra settings are shown for start mode fine tunning|
 |Initialize after first finishing line pass|Clock starts counting when the first car is detected (not when the countdown stops)|
 |Count first detection|If enabled, first detection will count as lap 1. Otherwise, lapcount will start on 0|
+Best lap Qualifying options
+^Option^Description^
+|Laps|Number of best laps to compute the "best lap" time. For example, you can use the 2 best lap times to be considered in order to compute the best racer|
+|Consecutive|If laps is greather than 1, you can define if the n-best laps must be consecutives|
+|Algorithm|You can choose if you want compute sum or average in order to show the "best lap time"|
 ==== 3.2 Duration ====
@@ Line 94: / Line 94: @@
 |Speaker|Countdown will be read out|
 |Call to start|If //Speaker// is enabled, seconds before start to begin read out \\ Example: 3 ( . . . . 3 2 1 go)|
-|Random call to start|Even choosing a //call to start// number of seconds, you want to do it randomly. If enabled, call to start will be random within the //call to start// number of seconds.|
+|Random call to start|Even choosing a //call to start// number of seconds, you could want to do it randomly. If enabled, call to start will be random within the //call to start// number of seconds.|
 |Time beteween cars|Pause time between racers stat on //staggered// start mode|
 |Min. lap time|Lap times under this value will be ignored. A special sound can be configured to distinguish this event and it will be dumped to the log console|
@@ Line 129: / Line 129: @@
 There are two actions available
-  * **//Extra debug// Checkbox**. It activates the extra debug information messages on ZRound Console. It only affects the current session (if is cleared if you restart ZRound unless you use the [[zround#starting zround|-debug]] command line setting
+  * **//Extra debug// Checkbox**. It activates the extra debug information messages on ZRound Console. It only affects the current session, it's cleared if you restart ZRound unless you use the [[zround#starting zround|-debug]] command line setting
   * **//Helpdesk report// button**. It ask you to save a report (.zip file) with system/zround/logs/database information. It can be claimed from helpdesk support if you aks for help to zround support team.