Differences

This shows you the differences between two versions of the page.

--- manuals:teamraces [2014/12/23 21:22] – created zround
+++ manuals:teamraces [2024/12/09 00:53] (current) – [Relay] zround
@@ Line 1: / Line 1: @@
 ====== Team Races ======
-Team races are full suported from 1.12 build 24 allowing management of team members and announing relays.
+Team races are full suported from 1.12 build 24 allowing management of team members and announcing relays.
-The feature include new user interface elements.
+The feature includes new user interface items.
 ===== Team management =====
 The racer's form includes an option to define it as a team.
+{{:manuals:team_races:team_options.png?400|}}
+Once the team is enabled, you can use the team manager to manage the members. A new option is included in the context menu as well.
+{{:manuals:team_races:team_popup.png?400 |}}
+With the team manager you can add/edit/remove members from the team using the context menu.
+{{:manuals:team_races:team_manager.png?400|}}
+===== Transponder assignment =====
+The transponder checking follows these rules:
+- Teams MUST own different transponder numbers
+- Team members must own the team transponder number or a system-wide unique transponder number.
+The system can detect automatically who is running if every racer installs its own transponder. If the racers share the same car, it can be difficult to change the transponder installation during the relay. It is allowed to share the same transponder number for all team members and there is an option in the context menu allowing to define the active driver (//racer running//) in order to control partial times. The option //use the same transponder// facilitates the transponder configuration and set the team transponder to the team members.
+===== Relay =====
+{{:manuals:team_races:team_relay_options.png |}}
+There is a "//relay//" page into the configuration window where you can setup the relay options
+^Setting^Value^Description^
+|Turn duration|minutes|Max. time racers run in their turn. 0 will disable the relay time control|
+|Relay time window| hh:mm:ss | time that teams have to change the driver.|
+|Turn time position into the relay time window| Start/Middle/End| Position into the the relay time window where turn time expires|
+|Time to warn starting relays| hh:mm:ss | Time to announce the relay|
+Example:
+|Turn duration| 20 min.|
+|Relay time window| 00:01:00 |
+|Time to warn starting relays | 00:02:00 |
+Turn time position into the relay time window
+min                     20min                                   21min
+   On start:         --+-------------------------[--------------------------------------]----------
+                     (warning starts)       (Turn time)                         (relay time end)
+                                         (relay time start)
+min 30sec            19min 30sec            20min           20min 30sec
+   Middle:           --+-------------------------[-------------------+------------------]-----------
+                     (warning starts)    (relay time start)     (Turn time)     (relay time end)
+min                     19min                                  20min
+   On end:           --+-------------------------[--------------------------------------]-----------
+                     (warning starts)    (relay time start)                        (Turn time)
+                                                                                (relay time end)
+===== Teams view =====
+The sessions panel show new formatted panels for teams including all team member data.
+If a racer is running more than the turn time then it will be highlighted in red.
+Teams will include: Position, Laps, Total time (for 1st) and interval (others), last time, best time
+Fastest ream will show best lap in fucshia
+Team members will display: laps, total time, mean time and best time. The fastests lap time will be shown in fucshia.
+The car stopped will be shown with a red warning including the word "BOX" blinking.
+{{:manuals:team_races:team_view.png|}}