Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revision | |
| lapcounters:protocols:open [2023/04/22 15:28] – zround | lapcounters:protocols:open [2023/06/18 08:22] (current) – [Protocol description] zround |
|---|
| |
| ^Sender^Command^Code^Description| | ^Sender^Command^Code^Description| |
| ^ZRound|Startup|%**C**&|ZRound tries to initialize the connection. It is used to verify the decoder is ready. The decoder must answer with an ACK within 500ms otherwise a timeout is fired and connection is discarded | | ^ZRound|Startup|%**C**&|ZRound tries to initialize the connection. It is used to verify the decoder is ready. The decoder must answer with an ACK within 500ms otherwise a timeout is fired and connection is discarded\\ //On TCP version ACK is not needed// | |
| ^LapCounter|Startup ACK|%**A**&|Acknowledge the %C& startup command within 500ms | | ^LapCounter|Startup ACK|%**A**&|Acknowledge the %C& startup command within 500ms | |
| ^ZRound|Race start|%**I**&|ZRound ask to start the race (clock must be set to zero) | | ^ZRound|Race start|%**I**&|ZRound ask to start the race (clock must be set to zero) | |
