ZRound can't connect to the lapcounter

Lapcounters usually are connected to the PC serial port. You must configure the communication port in the lapcounter configuration page of ZRound and you MUST use the Windows Device Name “COM1, COM2, etc.” instead of “1, 2, etc.”

When you use the port number instead of the comport name you will see this error on the ZRound event log window:

"Lapcounter comport X can not be opened. ComPort error: WriteFile function failed on X"
manuals/faq/connectlapcounter.txt · Last modified: 2016/01/11 18:19 by 127.0.0.1
CC Attribution-Share Alike 4.0 International
Driven by DokuWiki Recent changes RSS feed Valid CSS Valid XHTML 1.0