Differences

This shows you the differences between two versions of the page.

--- zround:application_settings [2021/06/20 22:15] – [Events(1)] zround
+++ zround:application_settings [2024/01/13 11:01] (current) – [Options] zround
@@ Line 87: / Line 87: @@
 ^Sound^Event^Default value^
 |Unregistered car|An unregistered car was detected during a race practice/run|resources\alarma.wav|
-|Suspected reading|A ghost lap was detected|(disabled)|
+|Suspected reading|A ghost lap was detected. Fired on these conditions:\\ * A racer exceeds time on limited time practice session\\ * On practice session, lap time < 1sec when lap noise control is enabled\\ * lap time < min. lap time setting|(disabled)|
 |Finish line pass|transponder detected on detector line|resources\count.wav|
 |Lights|starting light on|resources\count.wav|
@@ Line 149: / Line 149: @@
 If your native language is not supported on the user interface you should use the [[#Language]] settings to setup the resources needed to grant a reasonable automatic reading. You should edit Events text as well.
+{{ :zround:tts-settings.png?600 |}}
 ==== Speaker ====
@@ Line 157: / Line 158: @@
 Events define the text to be read out when they occurs. Only checked events are read.
+{{ :zround:tts-events1.png?600 |}}
 ^Setting^Description^
@@ Line 167: / Line 170: @@
 |Car finished|It announces the car has finished the run. Symbol %s will be replaced by the racer's name|
 |End of practice|It announces practice time has finished|
-|End race alarm|It announce the time to finish the race before the configured text|
+|End race alarm|It announces the time to finish the race before the configured text|
-|Finish line pass|It announce a racer passes the finish line. Symbol %s will be replaced by the racer's name and %p the racer's position|
+|Finish line pass|It announces a racer passes the finish line. Symbol %s will be replaced by the racer's name and %p the racer's position|
+|Lap time < Min. time|It announces a missed lap due lap time is under min. lap time. Symbol %s will be replaced by the racer's name and %t will be the lap time|
+You can use the //Default// button to restore default settings
 ==== Events(2) ====
+{{ :zround:tts.events2.png?600 |}}
+^Setting^Description^
+|First position|A new racer gets the first position. Racer's name is read after the configured text|
+|Best lap in race|A racer do the best lap in the race|
+|Best own lap|A racer do his best lap time on the current session. Racer's name and lap time will be read out after configured text|
+|Best own time|A racer do his ever best lap time. Racer's name and lap time will be read out after configured text|
+|Track best lap time|A racer do the track best lap time. First %s symbol will be replaced by the racer's name, second %s symbol will be replaced by the lap time|
+|Lap estimation|Estimation result for the racer. It uses three parameters with this order %s %d %s -> racer's name; %d -> number of laps; %s -> total time. Example: //%s estimate finish %d laps in %s//|
+|Interval gap reading|It defines how to read interval and gaps. First %s symbol will be replaced by the racer's name, second %s symbol will be replaced by the lap time|
+|Call racers using|If defines how to call racers. Name -> Racer's name; Number -> Racer's number on the run; Dorsal -> racer's number on the race.|
+You can use the //Default// button to restore default settings
 ==== Options ====
+{{ :zround:tts-options.png?600 |}}
+^Setting^Description^
+|Speak time to finish|Time to go in seconds to start announcing|
+|repeat on|seconds interval to repeat announce en of race at a time basis|
+|Positions to read on head changes|Number of positions (position/racer) to announce if race head changes|
+|Results reading after finishing race|Run results are read out when it goes when checked|
+|Read training result times|Practice session results are read out when checked|
+|Read estimation when value changes|Force estimations read out if the value changes when checked|
+|Read estimation every X laps|Estimation is read out every X laps|
+|Read best lap record in all heats/mains (up to 3rd)|If a racer gets up to the 3rd best lap on a race it will be announced (default text: Position X on best laps)|
+|All laps reading on free training|All lap times are read out on free practice sessions. If //name// is checked then the racer's name will be announced as well|
+|Read classification each|Classification will be announced periodically every X minutes when checked|
+|Start reading on lap number X|Announces won't be read out before the lap X. Reading from the first lap could be annoying because too many events occurs on the firsts laps|
+|Decimal places in lap time|Number of decimal places to read out times (1=tenths of seconds, 2=cents, 3=milliseconds)|
+|Skip lap times greather than|Avoid to announce wrong lap times, usually due to a lapcount failure or a race incident|
+|Classification reading during the race|Value used to announce the classification Raking/Interval/Gap/Laps result as shown bellow|
+^Classification Option^Description^
+|Ranking|Race position|
+|Interval|Difference with the first position|
+|Gap|Difference with the previows racer|
+|Laps|Number of laps|
 ==== Language ====
+ZRound Suite are available in several languages. However, you could need to use voice announces on your mother language despite the user interface uses another one.
+You can do it using these language settigs. Select the language you want to use and edit the key-words needed. Other text are configured as documented on [[#Events(1)]] & [[#Events(2)]] sections
+{{ :zround:tts-language.png?600 |}}
 ===== Network =====