Actions
Feature #101
closedOpen a standar protocol on tcp/serial ports for custom built lapcounters (TRANSLATE)
Start date:
05/07/2020
Due date:
05/31/2021
% Done:
100%
Estimated time:
Description
Add an "open lapcounter" option to allow custom built lapcounters to comunicate over network/serial with ZRound.
Updated by Jesús M. Broceño about 1 year ago
- Subject changed from Open a standar protocol on tcp/serial ports for custom built lapcounters to Open a standar protocol on tcp/serial ports for custom built lapcounters (TRANSLATE)
Updated by Jesús M. Broceño 11 months ago
- Status changed from Closed to In Progress
- Target version changed from 1.24.4 to 1.24.5
Kevin Fitch reports some issues ...
I believe I've found a few issues when using ZRound protocol over TCP/IP.
%C& is not sent on connect. Not a huge problem, but it is inconsistent with the serial behavior.
%F& is only sent when clicking "Disconnect" in the settings. It is never sent when a race ends.
ZRound appears to recognize %L detections correctly and they appear in the console/log area, but for some reason vehicle laps are never counted.
Updated by Jesús M. Broceño 11 months ago
- Status changed from In Progress to Closed
Actions