====== MyLaps AMBrc Lapcounter ======

ZRound works with Serial and Ethernet AMBrc links.

  * You must activate the lapcounter by checking the Activate option.
  * Detecion only is done if there is a practice or race in progress. 
  * Min. hit settings helps you to configure the minimun signal level allowed.

===== Serial version =====

  * Full serial port name must be configured at //Port// setting.

{{ :lapcounters:zround_ua9x7r2tl7.png?400 |}}

===== Ethernet version =====

When //Activate AMB P3 (Lan)// option is checked, ZRound will automatically search for a decoder over the network.

If it is not found then an error is displayed on the ZRound console (//AMB Decoder not found on network//). Anyhow, you can force the decoder address on the //IP Address// setting. 

{{ :lapcounters:zround_t7tochtsl0.png?400 |}}